Florida / Pasco County · Updated June 2026

Mobile home permit in Pasco County, Florida

The setbacks, zoning and requirements to set a manufactured home in Pasco County, with the county code cited. Piermits turns an address and a data plate into a validated, county-ready permit packet.

Front 15 ftSide 7.5 ftRear 15 ftWind zone IIFlood BFE + 1 ft
Check your lot freeBook a demo
Pasco County manufactured-home setbacksHomeRear 15 ftFront 15 ft7.5Street / right-of-wayMeasured to the wall

Manufactured-home setbacks in Pasco County

Zoning districtSLOR (lots > 60 ft)
Front setback15 ft
Side setback7.5 ft
Rear setback15 ft
Measured towall
Wind zoneWind Zone II
CitationPasco SLOR (lots > 60 ft)
A manufactured home is allowed in this district. Confirm the parcel zoning to be sure.

Source: Pasco County Land Development Code. Setbacks vary by zoning district and road class; Piermits resolves the parcel district automatically.

Inside an incorporated city in Pasco County? The city permits separately, with its own zoning and setbacks. See city vs county.

Flood and elevation in Pasco County

If the parcel sits in a special flood hazard area, the home must be elevated and an elevation certificate is required. Outside the flood zone, no elevation applies. The parcel flood zone comes from the FEMA map; Piermits reads it from the address.

Required elevationBFE + 1 ft
Basis§18-122 / LDC §1104.6.D.4
Elevation certificateRequired in a special flood hazard area (sealed by a surveyor)
Flood zonePer parcel, from the FEMA flood map (Piermits reads it from the address)

Freeboard is the unincorporated-county value; an incorporated city may adopt a higher number. The surveyor's elevation certificate fixes the final elevation for the parcel.

What you need to pull a mobile home permit in Pasco County

Licensed FL installer
A state-licensed mobile-home installer must pull the permit (FS 320.8249).
Site plan with setbacks
Drawn to scale, showing the home inside the front, side and rear setbacks.
Wind zone rating
The home must be rated at or above the site wind zone (24 CFR 3280.5).
Flood + elevation
If the parcel is in a special flood hazard area, an elevation certificate is required.
Septic and well
On a private system, the well must be 75 ft from the drainfield (FL DOH 64E-6).
Anchoring and blocking
Tie-downs, blocking and a vapor barrier per Rule 15C-1.

What Piermits generates for you

Every document the county asks for, validated against the code and ready to submit.

Site planBlocking planAnchoring affidavitNotice of CommencementSkirting affidavitCounty worksheet

Your Pasco County site plan, validated before submittal

An instrument-grade site plan drawn from the parcel: the home inside the Pasco County setback envelope, well to septic at 75 feet, wind zone and flood, every dimension cited to the code.

OAK RIDGE RD · 60' R/WMFD HOME28' x 56'W75'-0" MINREAR 15'FRONT 15'7.5'NSITE PLANSAMPLE PARCELPasco County, FLPasco CountyZONING SLOR (lots > 60 ft)SCALE 1"=20'SHEET SP-1VALIDATED0 BLOCKERS · READY TO SUBMIT

Pasco County, one of all 67 Florida counties we cover

Piermits has verified, district-level setbacks cited to the code for every Florida county, not just the metros. Pasco County is live today.

Alachua CountyBaker CountyBay CountyBradford CountyBrevard CountyBroward CountyCalhoun CountyCharlotte CountyCitrus CountyClay CountyCollier CountyColumbia CountyDeSoto CountyDixie CountyDuval CountyEscambia CountyFlagler CountyFranklin CountyGadsden CountyGilchrist CountyGlades CountyGulf CountyHamilton CountyHardee CountyHendry CountyHernando CountyHighlands CountyHillsborough CountyHolmes CountyIndian River CountyJackson CountyJefferson CountyLafayette CountyLake CountyLee CountyLeon CountyLevy CountyLiberty CountyMadison CountyManatee CountyMarion CountyMartin CountyMiami-Dade CountyMonroe CountyNassau CountyOkaloosa CountyOkeechobee CountyOrange CountyOsceola CountyPalm Beach CountyPasco CountyPinellas CountyPolk CountyPutnam CountySanta Rosa CountySarasota CountySeminole CountySt. Johns CountySt. Lucie CountySumter CountySuwannee CountyTaylor CountyUnion CountyVolusia CountyWakulla CountyWalton CountyWashington County

Mobile home permits in Pasco County: FAQ

Can I put a mobile home in Pasco County?
A manufactured home is allowed in this district. Confirm the parcel zoning to be sure.
What are the manufactured-home setbacks in Pasco County?
In the SLOR (lots > 60 ft) district, the setbacks are 15 ft front, 7.5 ft side and 15 ft rear, measured to the wall, per Pasco SLOR (lots > 60 ft). Setbacks vary by zoning district and road class; Piermits resolves the exact parcel district automatically.
What wind zone is Pasco County, Florida?
Pasco County is Wind Zone II. The home must be rated at or above the site wind zone (24 CFR 3280.5), or the county will reject the packet.
How high must a mobile home be elevated in Pasco County?
In a special flood hazard area, Pasco County requires the lowest floor at BFE + 1 ft (§18-122 / LDC §1104.6.D.4). A surveyor's elevation certificate fixes the final number for the parcel. Outside the flood zone, no elevation is required.
Who pulls the mobile home permit in Pasco County?
A state-licensed manufactured-home installer must pull the permit (FS 320.8249). Piermits builds the validated, county-ready packet, with every rule cited, so it clears review the first time.
Live in all 67 Florida counties

Get your Pasco County permit, approved the first time.

Book a 15-minute demo. Bring a real Pasco County address and watch the packet come together, validated and cited.

Book a demo